供应中心-塑胶产业网

现浇检查井模具的使用是非常方便的，可以在施工现场直接生产，根据工期来浇筑模具的数量。现浇检查井模具可以使用水泥或者混凝土进行浇筑，制作材料都是属于环保型的，使用寿命也比较长，模具成品有不同的使用特点，根据模具的性能来选择制作模具的材料，在生产过程中要注意模具的工作强度，避免发生意外情况。

现浇检查井模具是在地下使用的，是为了方便检查地下基础设施的工作情况，在市政工程建设中的需求量非常大，而且还在逐年上涨。检查井模具在制作时要注意混凝土的配比，搅拌均匀，避免影响模具的光滑度，保证模具的密度防止渗漏。在储存模具时放在干燥通风的地方，避免阳光直射。用钢板制作的模具必须用螺丝固定，严格检查现浇检查井模具的连接强度，防止漏浆。使用完后得现浇检查井模具要及时清理残留在模具内部的混凝土，保持整洁，防止模具生锈，可以在模具表面和内部刷一层油，既可以方便脱模还可以养护模具，定期的养护模具还可以延长模具的使用寿命。

The use of cast-in-place inspection well mould is very convenient. It can be directly produced in the construction site and the number of mould can be poured according to the construction period. The inspection well mould can be poured with cement or concrete. The material used for making the mould is environmentally friendly and has a long service life. The finished product of the mould has different characteristics. According to the performance of the mould, the material used for making the mould should be selected. In the production process, the working strength of the mould should be paid attention to so as to avoid accidents.

Cast-in-situ inspection well mould is used underground, in order to facilitate the inspection of the work of underground infrastructure, the demand in municipal engineering construction is very large, but also rising year by year. When making inspection well mould, we should pay attention to the proportion of concrete, mix evenly, avoid affecting the smoothness of the mould, ensure the density of the mould and prevent leakage. Store the mould in a dry and ventilated place to avoid direct sunlight. The die made of steel plate must be fixed by screw. The connection strength of the die must be checked strictly to prevent slurry leakage. After use, the inspecting well mould should clean the concrete remaining in the mould in time, keep it clean, prevent the mould from rusting, brush a layer of oil on the surface and inside of the mould, which can not only facilitate demoulding but also maintain the mould. Regular maintenance of the mould can also prolong the service life of the mould.